PC DAILER USER ALERT

DEAR CLIENT IF YOU ALREADY HAVE I-TEL PC2PHONE DAILER IN UR PC THEN NO NEED TO DOWNLOAD IT AGAIN OPEN DAILER GO TO SETTINGS CHANGE OPREATOR CODE AND CHANGE USER/PASSWORD SAVE SETTINGS CLOSE PC DAILER AND RE-OPEN AGAIN FOR eg IF YOU ARE USING CALL2FAMILY CARD THEN ONLY CHANGE OPP CODE USE FZCALL OPP (50834) CODE AND CHANGE USER/PASS AND CLOSE DAILER AND RE-OPEN IT CALLS WILL CONNECT SMOOTHLY

Fring Settings

Please follow the following steps for fring setting:-
Step 1
Assume that you have already signed up and downloaded the application from www.fring.com.
You can find the installation guide is also available on www.fring.com.
Step 2

1. Start Fring
2. Select 'Menu' then choose 'Settings' and 'Configure Services'
3. Select the 'SIP' check box.

Step 3

• Once the provider list is shown select 'other'.
• Enter your account number.(PIN/SIP account)
• proxy. Click = OK.
• USER ID =UserName
• PASSWORD =Password
• PROXY ADDRESS = sip.fzcall.com

Step 4
Make calls!

Nimbuzz Settings

How to configure SIP settings on Nimbuzz:
Step 1:

1. Open Nimbuzz
2. Go to Options
3. Go to Settings
4. Go to SIP providers
5. Go to other
   • Username: <fzcall User Name>@IP adress
   • Password:(fzcall Password)
   • Proxy server:Sip.fzcall.com
6. Save
7. Ok

Step 2

1. Go to Options
2. Go to Settings
3. Go to VoIP provider settings
   • Change VoIP Provider to SIP
   • You can see three options
     o NimbuzzOut
     o SIP
     o SkypeOut
4. Select SIP
5. Press ok
6. That’s all

How to make call:

1. Go to Call options by pressing right navigation key (I use Nokia N73).
2. Go to Options
3. Dial a number

Note: you can select contact numbers that are stored in your mobile phone. But make sure you have route for that dialing pattern.

SIP Settings

Please follow the step for nokia sip setting.
Step1

• Profile Name: profile1
• Profile: IETF Default
• Access point: (your WLAN AP name)
• Public user name: username@sip.fzcall.com
• Registration: "Always on "
• Use Security: No

Step 2 Registrar Server:
Enter the following for Proxy Server settings

• Proxy Server: sip.fzcall.com
• Realm: saicall
• User Name: username
• Password: Enter the password that you chose when you signed up for the service.
• Transport Type: UDP
• Port: 5060

Step 3

• Proxy Server:
• Proxy Server Address: sip.fzcall.com
• Registrar Server:none
• Realm: none
• User Name: none